Kold-Draft Error 80: Full-Rinse Mode
Severity
low
Difficulty
Easy
Time
0 min (normal operation)
Pro Cost
N/A (normal operation)
| Error Code | Error 80 |
|---|---|
| Meaning | Full-Rinse Mode |
| Quick Fix | No action needed — allow the rinse cycle to complete |
| Affected Models | GT360, GT560, GB561, GBX564, GTX360, GBX560 |
Kold-Draft Error Error 80 indicates full-rinse mode. Error 80 is a normal operation indicator on Rev 1.3 firmware boards only. The machine is in its full-rinse cycle, flushing the water system. No action is needed; allow the cycle to complete.
What Causes Kold-Draft Error Error 80?
Possible Causes
- 1 Machine is performing a scheduled water system rinse (normal operation)
Affected Models
Houston Climate Factor
The full-rinse cycle helps flush Houston's mineral-heavy water from the system. Do not interrupt it.
How to Fix Kold-Draft Error Error 80
Follow these steps to troubleshoot and potentially resolve the Error 80 error on your Kold-Draft ice machine.
Before You Start
- 1. Disconnect power — unplug your Kold-Draft ice machine
- 2. Turn off water supply — prevent leaks during repair
- 3. Check warranty — DIY repairs may void coverage
Step 1
No action needed — allow the rinse cycle to complete
Step 2
Machine will resume normal operation automatically
Did these steps resolve the error?
Great news!
To prevent this from happening again, check the prevention tips below.
View Prevention TipsLooks like you need a pro
This Error 80 error on your Kold-Draft may require professional diagnosis. Houston technicians can typically resolve this for N/A (normal operation).
How to Prevent Kold-Draft Error Error 80
Allow rinse cycles to complete fully before restarting
This code appears only on Rev 1.3 firmware
When to Call a Kold-Draft Professional
Only if the machine gets stuck in rinse mode and will not resume normal operation.
Frequently Asked Questions
What does Kold-Draft error Error 80 mean?
Error 80 is a normal operation indicator on Rev 1.3 firmware boards only. The machine is in its full-rinse cycle, flushing the water system. No action is needed; allow the cycle to complete.
How do I fix Kold-Draft Error 80 error?
To fix Kold-Draft Error 80: No action needed — allow the rinse cycle to complete. Machine will resume normal operation automatically. Only if the machine gets stuck in rinse mode and will not resume normal operation.
Is Kold-Draft Error 80 serious?
Kold-Draft Error 80 is rated as low severity. This issue can often be resolved with DIY fixes.
How much does it cost to fix Kold-Draft Error 80?
Typical repair cost for Kold-Draft Error 80 is N/A (normal operation). This includes diagnosis, parts, and labor. Professional ice machine cleaning in Houston starts at $199.
What tools do I need to fix Kold-Draft Error 80?
Basic tools like a coil brush, multimeter, and cleaning solution may help. Always disconnect power before starting any repairs.
Can I fix Kold-Draft Error 80 myself?
This repair is rated as easy difficulty. Most people can handle this with basic tools. Estimated time: 0 min (normal operation).
Other Kold-Draft Error Codes
View all Kold-Draft codes →Diagnostic Tools
Need Help With Kold-Draft Error Error 80?
Houston Kold-Draft specialists available for same-day service. Get a free quote in minutes.