Kold-Draft GT360 Ice Machine
Professional cleaning and maintenance service for the Kold-Draft GT360. 360 lbs/day full cube ice production capacity. Same-day service available in Houston.
Quick Specs
Kold-Draft GT360 Technical Specifications
| Specification | Value |
|---|---|
| Model Number | GT360 |
| Brand | Kold-Draft |
| Series | GT |
| Daily Ice Production | 360 lbs/day |
| Ice Type | full cube |
| Cooling System | air-cooled |
| Voltage | 115V |
| Machine Type | modular |
| Dimensions (W×D×H) | 24"W x 26"D x 24"H |
| Cleaning Time | 3 hours |
| Cleaning Difficulty | complex |
Key Features
Kold-Draft GT360 Maintenance Schedule
Recommended maintenance intervals for optimal performance and FDA compliance.
Daily Tasks
- Wipe exterior surfaces with approved sanitizer
- Check ice quality for clarity and odor
- Verify bin door seals properly
- Empty and sanitize ice scoop
Weekly Tasks
- Inspect water inlet filter for debris
- Check for unusual sounds during operation
- Verify ice production rate is normal
- Clean exterior condenser (if accessible)
Monthly Tasks
- Clean and sanitize storage bin interior
- Visual inspection of condenser coils
- Check water lines for leaks or buildup
- Test bin level sensor operation
- Inspect door gaskets and hinges
Quarterly Professional Service
Recommended every 3 months
- Professional deep cleaning and sanitization
- Full descaling of evaporator and water system
- Condenser coil deep cleaning
- Water filter replacement
- Component inspection and adjustment
- FDA compliance documentation update
Annual Inspection
- Complete system inspection by certified technician
- Refrigerant system check (EPA certified)
- All moving parts lubrication
- Control board diagnostic
- Full operational certification
Common GT360 Issues
Related Error Codes
GT360 FAQ
What is the daily production of the Kold-Draft GT360?
The Kold-Draft GT360 has a daily ice production capacity of 360 lbs per day. It produces full cube ice and utilizes an air-cooled cooling system.
How often should I clean a Kold-Draft GT360?
The Kold-Draft GT360 should receive professional deep cleaning every 3-4 months for commercial use. Daily wipe-downs and monthly bin sanitization are recommended between professional services. This 360 lbs/day machine requires regular maintenance to maintain FDA compliance.
What does Kold-Draft GT360 maintenance cost?
Professional cleaning for the Kold-Draft GT360 typically costs $199-$349 depending on condition. The 3 hours cleaning time is standard. Annual maintenance contracts are available for regular service at reduced rates.
What are common problems with the Kold-Draft GT360?
Common issues with the Kold-Draft GT360 include: scale on cube molds, slow melt degradation, water quality sensitivity. Regular professional cleaning can prevent most of these problems and extend equipment life.
Schedule GT360 Cleaning Today
Professional Kold-Draft GT360 cleaning in Houston. 3 hours service time. Same-day emergency available.